Vee Ess And Co.

INTRODUCTION

Leader Ductile Iron ’Y’ type Strainer offers best solution for separation and segregation for pump protection, flow meter protection, valves protection, regulator protection. In water handling equipment it works to save from damage through sand or any other solid particles.

• Designed to manufacturer standard.
• ’Y’ Type pattern, Bolted in Cover.
• Body castings made of superior Ductile Iron ASTM A395 grade to ensure additional strength.
• SS (Type 304) Screen Having 1mm Dia Perforation snugly fitted on machined surface to ensure no particle larger than the screen opening can escape around the end of the screen.
• Filtration area approximately 3 times more than flow bore area of the body.
• Body cavity with largest possible filtration area to counter decrease in flow rate caused by clogging.
• Fine finish and smooth contours of flow way reduce the pressure drop.
• Screen is guided both in body and cover.
• Strainer may be installed in vertical lines and horizontal lines with effectiveness.
• Drain plug is provided on the valve to drain out the foreign particles accumulated in the strainer.
• Flanged ends to ASME B16.5 CL-150 (FF).
• END CONNECTION
  • Flanges as per ASME B16.5 CL-150 (FF) Drilled.
  • Flange drilling as per other standards also available upon request.
  UTILISATION & SERVICE
  • “LEADER” Ductile Iron 'Y’ Type Strainer are suitable for above-ground installations.
  • Best suited for potable water, treated fresh water, neutral liquids & some gases.
  WORKING PRESSURE
  • Maximum Working Pressure: 20 Bar.

• Leader Cast Iron Y-Type Strainer PN-25 with Flanged ends (15mm – 200mm).

• Effectively removes debris and particles to protect pipelines and equipment.

• Durable cast iron construction for medium to high-pressure applications.

• Widely used in water, oil, steam, and industrial fluid systems.